Navigation Pane

You can use the navigation pane to see what commands are available and to quickly browse through the command hierarchy. A row of buttons at the top of the navigation pane provides a quick method to perform common functions.

Note

For module-based chassis, menu options related to a specific module are activated only after you install and select the required module.

The following table describes the buttons that display at the top of the navigation pane.

Table 1. Navigation pane buttons
Button	Name	Description
	Save Config	Saves the running configuration.
	Refresh Status	Refreshes the Device Physical View.
	Edit	Edits the selected item in the Device Physical View.
	Graph	Opens the graph options for the selected item in the Device Physical View.
	Help Setup Guide	Opens instructions about how to install the Help files and configure EDM to use the Help files.

Expand a folder by selecting the directional arrow next to the folder name. Some folders have sub-folders such as the Edit folder, which has the Port, NTP, and other sub-folders.

Within each folder and sub-folder, there are numerous options, which provide access to tabs. To open an option, select it. The selected tab displays in the menu bar and opens in the content pane. The following table describes the top-level folders in the navigation pane.

Table 2. Navigation Pane Folders
Menu	Description
Device	Use the Device menu to refresh and update device information or enable polling. Preference Setting — Enable polling or hot swap detection. Configure the frequency to poll the device. Refresh Status — Use this option to refresh the device view. Rediscover Device — Use this to trigger a rediscovery to update all of the device information.
VRF Context view	Use the VRF Context view to switch to another VRF context when you use the embedded EDM. GlobalRouter is the default view at log in. You can configure both Global Router (GRT) and Virtual Routing and Forwarding (VRF) instances when you launch a VRF context view. You can open only five tabs for each EDM session.
Edit	Use the Edit menu to view and configure parameters for the chassis hardware or for the currently selected hardware component, including one or more ports. You can also use the Edit menu to perform the following tasks: check and configure ports, including the internal Extreme Integrated Application Hosting ports, on the device change the configuration of many features, including but not limited to, the file system, NTP, OVSDB, SMTP, Link-state tracking, VTEP, Management Instance, Endpoint Tracking, and SNMPv3
Graph	Use the Graph menu to view and configure EDM statistics and to produce graphs of the chassis or port statistics.
Power Management	Use the Power Management menu to view and configure Energy Saver.
VLAN	Use the VLAN menu to view and configure VLANs, spanning tree groups (STG), MultiLink Trunks/LACP, SMLT, and SLPP.
Fabric	Use the Fabric menu to view and configure IS-IS, Shortest Path Bridging MAC (SPBM), I-SIDs, Fabric Attach, DvR, and statistics.
VRF	Use the VRF menu to view and create VRFs.
IP	Use the IP menu to view and configure IP routing functions for the system, including the following: IP-VPN IP-MVPN IP TCP/UDP OSPF RIP VRRP RSMLT BGP Multicast MSDP IGMP IPFIX PIM SPB-PIM-GW DHCP Relay DHCP Snooping ARP Inspection Source Guard UDP Forwarding IS-IS Policies BFD
IPv6	Use the IPv6 menu to view and configure IPv6 routing functions, including the following: IPv6 IPv6 - VPN TCP/UDP Tunnel OSPFv3 VRRP BGP+ RSMLT DHCP Relay Policy FHS IS-IS RIPng IPv6 PIM IPv6 MLD IPv6 Mroute IPv6 BFD
Security	Use the Security menu to view and configure access policies, ACL filters, certificates, and features such as RADIUS, RADIUS CoA, SSH, IPSec, TACACS+, and EAPoL.
QOS	Use the QOS menu to view and configure mapping tables, QoS port states, CoS Queue Stats, and Queue Profiles.
Serviceability	Use the Serviceability menu to run diagnostics, and to enable, configure, or view the following: RMON sFlow Application Telemetry RESTCONF Virtual services ExtremeCloud IQ Agent