Configuring PoE Power Usage Threshold

About this task

Perform the following procedure to configure the PoE power usage threshold limit globally as a percentage on the switch. The switch logs a warning message when a PoE PD power usage exceeds the configured threshold. The switch logs an informational message when a PoE PD power usage is below the configured threshold.

Procedure

Enter Global Configuration mode:

enable

configure terminal
Configure the power usage threshold:

poe poe-power-usage-threshold <1–99>.

Variable Definitions

The following table defines parameters for the poe-power-usage-threshold command.


Variable	Value
`<1–99>`	Specifies the PoE usage threshold in the range of 1—99 percent.