Displaying Detailed Statistics for Ports
Display detailed statistics for specific ports to manage network performance.
Note
Slot and port information can differ depending on hardware platform.
Procedure
Example
View statistics for various ports:
Switch:1>enable Switch:1#show interfaces gigabitethernet statistics verbose Please widen the terminal for optimal viewing of data. =========================================================================================== Port Stats Interface Extended =========================================================================================== PORT_NUM IN_UNICST OUT_UNICST IN_MULTICST OUT_MULTICST IN_BRDCST OUT_BRDCST IN_LSM OUT_LSM ------------------------------------------------------------------------------------------- 2/1 0 0 0 0 0 0 0 0 2/2 0 0 0 0 0 0 0 0 2/3 0 0 0 0 0 0 0 0 2/4 0 0 0 0 0 0 0 0 2/5 0 0 0 0 0 0 0 0 2/6 0 0 0 0 0 0 0 0 3/1 0 0 0 0 0 0 0 0 3/2 0 0 0 0 0 0 0 0 3/3 0 0 8702 34805 0 0 0 0 3/4 0 0 0 0 0 0 0 0 3/5 0 0 0 0 0 0 0 0 3/6 0 0 0 0 0 0 0 0 3/7 0 0 0 0 0 0 0 0 3/8 0 0 0 0 0 0 0 0 3/9 0 0 0 0 0 0 0 0 --More-- (q = quit)
Variable Definitions
Use the data in the following table to use the show interfaces GigabitEthernet statistics verbose command.
Variable |
Value |
---|---|
{slot/port[/sub-port][-slot/port[/sub-port]][,...]} |
Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port. |