Clearing the peer connection

Clear the peer connection to clear the TCP connection to the specified MSDP peer, and reset all MSDP message counters.

Note

This procedure does not clear the SA cache entries the router learns from the peer.

Procedure

Enter Privileged EXEC mode:

enable
Clear the peer connection:

clear ip msdp peer {A.B.C.D} [vrf WORD<0-16>] [vrfids WORD<0-512>]

Switch:1>enable

Switch:1#configure terminal

Switch:1(config)#clear ip msdp peer 21.0.0.2

The following table defines parameters for the clear ip msdp peer command.


Variable	Value
`{A.B.C.D}`	Specifies the MSDP peer IP address.
vrf `WORD<0–16>`	Specifies the VRF name.
vrfids `WORD<0–512>`	Specifies the VRF ID.