Configuring an ACE Ethernet port

Use ACE Ethernet port entries so that the filter looks for traffic on specific ports. You can only insert an ACE Common Ethernet port for VLAN ACL types.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > Security > Data Path.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select the appropriate ACL.
  5. Click ACE.
  6. Select the appropriate ACE.
  7. Click Eth.
  8. Click the Port tab.
  9. Click Insert.
  10. Specify the operation type.
  11. Click the Port ellipses (...).
  12. Choose the ports.
  13. Click OK.
  14. Click Insert.

Port field descriptions

Use the data in the following table to use the Port tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

The eq parameter specifies an operator for a field match condition: equal to.

Port

Specifies the port or port list on which to perform a match.
9037469-00 Rev AB