SBT configuration
This configuration allows you to build a snooping binding table (SBT) which contains entries from only trusted devices or hosts. This SBT table is used to validate Neighbor Discovery (ND) packets. You can view, create, or delete the entries in the SBT.
Create an SBT Entry
About this task
Use this procedure to create an SBT entry.
Procedure
- In the navigation pane, expand .
- Click FHS.
- Click the Snoop Binding tab.
- Click Insert.
- Configure the parameters for the snoop binding.
- Click Insert.
- Optional: Click Refresh to update the results.
Snoop Binding field descriptions
Use the data in the following table to use the Snoop Binding tab. The system displays a subset of these fields if click Insert.
|
Name |
Description |
|---|---|
|
VlanId |
Specify the VLAN to which the snooped entry belongs. |
|
Ipv6Address |
Enter the IPv6 address assigned to the IPv6 host. |
|
MacAddress |
Enter the MAC address of the snooped entry. |
|
InterfaceIndex |
Specify the interface on which the entry is learnt. |
|
EntryType |
Indicates the type of entry - static (1) or dynamic (2). |
|
EntrySource |
Indicates the method entry was learnt from - static (1) or dhcp (2). |
|
ValidTime |
Indicates the valid time for the snooped entry. |
|
TimeToExpiry |
Indicates the time to expiry of the snooped entry. |
View SBT Entries
About this task
Use this procedure to display a configured SBT table.
Procedure
- In the navigation pane, expand .
- Click FHS.
- Click the Snoop Binding tab.
Snoop Binding field descriptions
Use the data in the following table to use the Snoop Binding tab. The system displays a subset of these fields if click Insert.
|
Name |
Description |
|---|---|
|
VlanId |
Specify the VLAN to which the snooped entry belongs. |
|
Ipv6Address |
Enter the IPv6 address assigned to the IPv6 host. |
|
MacAddress |
Enter the MAC address of the snooped entry. |
|
InterfaceIndex |
Specify the interface on which the entry is learnt. |
|
EntryType |
Indicates the type of entry - static (1) or dynamic (2). |
|
EntrySource |
Indicates the method entry was learnt from - static (1) or dhcp (2). |
|
ValidTime |
Indicates the valid time for the snooped entry. |
|
TimeToExpiry |
Indicates the time to expiry of the snooped entry. |
Delete an SBT Entry
About this task
Use this procedure to delete an entry from the SBT table.
Procedure
- In the navigation pane, expand .
- Click FHS.
- Click the Snoop Binding tab.
- Select a row from the list to delete.
- Click Delete.