Configuring an ACE IPv6 traffic class

Configure ACE IPv6 traffic class.

Before you begin

  • The ACL exists.

  • The ACE exists.

Procedure

  1. In the navigation tree, expand the following folders: Configuration > Security > Data Path.
  2. Click Advanced Filters (ACE/ACLs).
  3. Click the ACL tab.
  4. Select the appropriate ACL.
  5. Click ACE.
  6. Select the appropriate ACE.
  7. Click IPv6.
  8. Click the Traffic Class tab.
  9. Click Insert.
  10. In the Oper field, select the operation type.
  11. In the TrafficCls field, enter the traffic class number.
  12. Click Insert.

Traffic Class field descriptions

Use the data in the following table to use the Traffic Class tab.

Name

Description

AclId

Specifies the ACL ID.

AceId

Specifies the ACE ID.

Oper

The eq parameter specifies an operator for an “equal to” field match condition.

TrafficCls

Specifies the traffic class attribute of the IPv6 header. Traffic class identifies different classes or priorities of IPv6 packets. The range is 0–255.

9037469-00 Rev AB