Configuring Fast Advertisement Interval on a VLAN or a VRF instance

About this task

Configure the Fast Advertisement Interval to send VRRP advertisement messages. The interval can be between 200 and 1000 milliseconds, and it must be the same on all participating routers. The default is 200. Enter the values in multiples of 200 milliseconds.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > VLAN.
  2. Click VLANs > Basic.
  3. Select a VLAN.
  4. Click IP.
  5. Click the VRRP tab.
  6. Click Insert.
  7. In the IP, VLAN, Insert VRRP dialog box, click the FasterAdvIntervalEnable enable option.
  8. In the FasterAdvInterval, box, enter a value. You must set the value using multiples of 200 milliseconds.
  9. Click Insert.
9037469-00 Rev AB