View Power Supply Parameters

Perform this procedure to view information about the operating status of the power supplies.

Procedure

Use the data in the following table to use the Details tab.


Name	Description
Id	Specifies the ID number.
Type	Describes the type of power used.
Description	Provides a description of the power supply.
SerialNumber	Specifies the power supply serial number.
HardwareRevision	Specifies the hardware revision number.
PartNumber	Specifies the power supply part number.
PowerSupplyOperStatus	Specifies the status of the power supply as one of the following: on (up) off (down)
InputLineVoltage	Displays the input line voltage: low 110v—power supply connected to a 110 Volt source high 220v—power supply connected to a 220 Volt source ac110vOr220v—power supply connected to a 110 Volt or 220 Volt source
OutputWatts	Displays the output power of this power supply.
InputOperLineVoltage	Displays the operating input line voltage. If the power supplies in a chassis are not of identical input line voltage values, the operating line voltage shows the low 110v value.
InputPower	Displays the input power of this power supply.