Configuring the MSDP peer connect-retry period

Configure the connect-retry period to specify the amount of time, in seconds, between connection attempts for peering sessions. The default is 30 seconds.

Procedure

Enter either Global Configuration mode or VRF Router Configuration mode for a specific VRF context:

enable

configure terminal

Optional: router vrf WORD<1-16>
Configure the MSDP peer connect-retry period:

ip msdp connect—retry {A.B.C.D} <1-65535>

Example

Switch:1>enable

Switch:1#configure terminal

Switch:1(config)#ip msdp connect—retry 21.0.0.2 40

Variable definitions

The following table defines parameters for the ip msdp connect-retry command.


Variable	Value
`{A.B.C.D}`	Specifies the MSDP peer IP address.
`<1-65535>`	Specifies the connect-retry interval in seconds. The default is 30 seconds.