Enable Enhanced Secure Mode

Use the following procedure to enable enhanced secure mode in either the JITC or non-JITC sub-modes.

The enhanced secure mode is disabled by default.

About this task

After you enable enhanced secure mode, the system can provide role-based access levels, stronger password requirements, and stronger rules on password length, password complexity, password change intervals, password reuse, and password maximum age use.

After you disable enhanced secure mode, the authentication, access-level, and password requirements work similarly to any of the existing commercial releases.

Note

Note

You can use EDM to enable or disable enhanced secure mode. To configure the security enhancements this feature provides, you must use CLI.

Procedure

  1. On the Device Physical View, select the device.
  2. In the navigation pane, expand Configuration > Edit.
  3. Click Chassis.
  4. Click the Boot Config tab.
  5. In the EnableEnhancedsecureMode option box, select either jitc or non-jitc to enable the enhanced secure mode in one of these sub-modes. Select disable to disable the enhanced secure mode.
    Note

    Note

    As a best practice, enable the non-JITC sub-mode. The JITC sub-mode is more restrictive and prevents the use of some troubleshooting utilities.

  6. Click Apply.
  7. Save the configuration, and restart the switch.
9037469-00 Rev AB