View NEAP MAC Information

Use this procedure to view NEAP client MAC information on a port.

Procedure

In the navigation pane, expand Configuration --> Security --> Data Path.
Select 802.1X – EAPOL.
Select NEAP Radius tab.

NEAP Radius Field Descriptions

The following table describes values on the NEAP Radius tab.


Name	Description
MacPort	Indicates the port number associated with this port.
MacAddr	Indicates the MAC address of the client.
MacStatus	Indicates the authentication status of the NEAP host that is authenticated using the RADIUS server.
VlanId	Indicates the VLAN assigned to the client.
MacClear	Clears the non EAP MAC entry associated with a specific index.
MacPriority	Indicates the priority associated with this Non-EAP client MAC. This priority could be the Radius assigned priority or the port QOS level.
SwUniBindings	Indicates the VLAN and I-SID bindings. VLAN is represented with 2 bytes and I-SID is represented with 4 bytes. The output is a continuous hexadecimal representation of the VLAN that is followed by the corresponding I-SID.
IsidSource	Indicates the source of the I-SID value. An I-SID value is generated in one of the following ways: radius—Indicates that that I-SID value is learned from the RADIUS server. autoconfig—Indicates that I-SID value is calculated by using the auto-isid-offset that you configured. config—Indicates that the I-SID value is statically configured. notAvailable—Indicates that no I-SID value is available because EAP with FlexUNI is not used.
NonEapAuthType	Indicates the authentication type of the Non-EAP client: radius - received from RADIUS server. lldp - received from Link Layer Discovery Protocol (LLDP).
AclId	Indicates the dynamic Access Control List (ACL) on the specific port.
AceIdList	Indicates the list of dynamic Access Control Entries (ACE) on the specific port.
DynamicSettings	Displays the Dynamic settings received from the Remote Authentication Dial-In User Service (RADIUS) server.

9037469-00 Rev AB