View Multihost Status Information

Use the following procedure to display multiple host status for a port.

Procedure

The following table describes values on the MultiHost Status tab.


Name	Description
PortNumber	Indicates the port number associated with this port.
ClientMACAddr	Indicates the MAC address of the client.
PaeState	Indicates the current state of the authenticator PAE state machine.
VlanId	Indicates the VLAN assigned to the client.
Priority	Specifies the priority associated with this client MAC. This priority could be the Radius assigned priority or the port QOS level.
SwUniBindings	Indicates the Extensible Authentication Protocol (EAP) VLAN:ISID bindings that the switch represents as an hexadecimal value.
IsidSource	Indicates the origin of I-SID value: radius - received from the RADIUS server. autoconfig - calculated using the auto-isid-offset command, that the user configures on the switch. config - configured statically. notAvaliable - does not use EAP with FlexUNI, hence there is no I-SID to use.
AclId	Indicates the dynamic Access Control List (ACL) on the specific port.
AceIdList	Indicates the list of dynamic Access Control Entries (ACE) on the specific port.
DynamicSettings	Displays the Dynamic settings received from the Remote Authentication Dial-In User Service (RADIUS) server.