Configuring the Spanning Tree mode

Configure the Spanning Tree mode to change the mode to MSTP or RSTP mode.

Important

After you change the mode, restart the system for the changes to take effect.

Procedure

In the navigation pane, expand the Configuration > VLAN > Spanning Tree folders.
Click Globals.
Select the required spanning tree mode.
Click Apply.

The system notifies you that the setting takes effect after you save the configuration and restart the server.

Use the data in the following table to use the Globals tab.


Name	Description
SpanningTreeAdminMode	Configures the spanning tree mode as either RSTP or MSTP. The default is MSTP.
SpanningTreeOperMode	Specifies the current mode of the spanning tree.