Configure Endpoint Tracking Visibility Mode

Configure Endpoint Tracking visibility mode on the switch.

Before you begin

  • In ExtremeCloud IQ ‑ Site Engine, configure your third-party virtualization platform, and the RADIUS server used for Endpoint Tracking authentication. For information about configuring ExtremeCloud IQ ‑ Site Engine, see the ExtremeCloud IQ ‑ Site Engine documentation at https://www.extremenetworks.com/support/documentation/.

  • On the switch, add and configure the RADIUS server as configured in ExtremeCloud IQ ‑ Site Engine.

  • Create and enable Endpoint Tracking on interfaces.

  • Enable Endpoint Tracking globally on the switch.

About this task

Enable visibility mode to allow MAC learning on static S-UNIs for Endpoint Tracking.

Procedure

  1. Enter Global Configuration mode:

    enable

    configure terminal

  2. Enable Endpoint Tracking visibility mode on the switch:
    endpoint-tracking visibility-mode
9037469-00 Rev AB