Shows system control settings.
show sys control
None
User EXEC
The tcp-keepalive-time, tcp-keepalive-interval, tcp-keepalive-probes, and mac-move-protection fields are not supported on VSP 8600 Series.
The show sys control command displays the following information:
|
Output field |
Description |
|---|---|
|
tcp-timestamp |
Displays if the timestamp is enabled or disabled. |
|
tcp-keepalive-time |
Displays the value of the TCP keepalive time in seconds. |
|
tcp-keepalive-interval |
Displays the value of the TCP keepalive interval, in seconds. |
|
tcp-keepalive-probes |
Displays the value for the TCP keepalive probes. |
|
mac-move-protection |
Displays if MAC move protection is enabled or disabled for the Virtual-IST (vIST). |
The following example displays output from the show sys control command.
Switch:1>show sys control
==========================================================================================
System Control Settings
==========================================================================================
tcp-timestamp : disable
tcp-keepalive-time : 120
tcp-keepalive-interval : 60
tcp-keepalive-probes : 15
mac-move-protection : on