show ipv6 tcp
You can display IPv6 TCP information. Check the health of connections, from the switch
perspective, as they traverse the network detect intermittent connectivity detect attacks
on resources determine which applications are active by checking the port numbers view
statistics about TCP connections
Syntax
-
show ipv6 tcp
-
show ipv6 tcp
connections
-
show ipv6 tcp connections
vrf WORD<1-16>
-
show ipv6 tcp connections
vrfids WORD<0-512>
-
show ipv6 tcp
listener
-
show ipv6 tcp listener vrf
WORD<1-16>
-
show ipv6 tcp listener
vrfids WORD<0-512>
-
show ipv6 tcp
properties
-
show ipv6 tcp properties
vrf WORD<1-16>
-
show ipv6 tcp properties
vrfids WORD<0-512>
-
show ipv6 tcp
statistics
-
show ipv6 tcp statistics
vrf WORD<1-16>
-
show ipv6 tcp statistics
vrfids WORD<0-512>
Command Parameters
- connections
- Displays IPv6 TCP connection table
information that includes: local port remote port local address remote address
state.
- listener
- Displays IPv6 TCP listener table
information that includes: local port and local address.
- properties
- Displays IPv6 TCP global
properties information that includes: RtoAlgorithm - the timeout value used for
retransmitting unacknowledged octets. RtoMin -the minimum time, in milliseconds,
permitted by a TCP implementation for the retransmission timeout. RtoMax - the
maximum time (in milliseconds) permitted by a TCP implementation for the
transmissions timeout. MaxConn - the maximum connections for the device.
- statistics
- Displays IPv6 TCP global
statistics information that includes: ActiveOpens, PassiveOpens, AttemptFails,
EstabResets, CurrEstab, InSegs, OutSegs, RetransSegs, InErrs, OutRsts, HCInSegs,
and HCOutSegs.
- vrf WORD<1-16>
- Specifies a VRF name. The VRF
parameter is optional.
- vrfids WORD<0-512>
- Specifies a VRF by ID. The VRF
parameter is optional.
