ip igmp stream-limit-group

Configure multicast stream limitation members on ports of a specific VLAN to limit the number of multicast groups that can join a VLAN.

Syntax

default ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
default ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable
ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable max-streams <0-65535>
ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...]} max-streams <0-65535>
no ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
no ip igmp stream-limit-group {slot/port[/sub-port][-slot/port[/sub-port]][,...]} enable

{slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.
max-streams <0-65535>: Configures the maximum number of allowed streams for the specified ports on this VLAN. The range is from 0-65535 and the default is 4. To use the default configuration, use the default option in the command: default ip igmp stream-limit-group <ports>

None

VLAN Interface Configuration