ipv6 isis accept adv-rtr (for a VRF)

Configure an IPv6 Intermediate-System-to-Intermediate-System (IS-IS) accept policy instance to apply to all IPv6 routes for a specific Backbone Edge Bridge (BEB) for a Virtual Routing and Forwarding (VRF) instance.

Syntax

ipv6 isis accept adv-rtr <x.xx.xx>
ipv6 isis accept adv-rtr <x.xx.xx> enable
ipv6 isis accept adv-rtr <x.xx.xx> i-sid <0-16777215>
ipv6 isis accept adv-rtr <x.xx.xx> i-sid <0-16777215> enable
ipv6 isis accept adv-rtr <x.xx.xx> i-sid <0-16777215> route-map WORD<1-64>
ipv6 isis accept adv-rtr <x.xx.xx> isid-list WORD<1-32>
ipv6 isis accept adv-rtr <x.xx.xx> isid-list WORD<1-32> enable
ipv6 isis accept adv-rtr <x.xx.xx> isid-list WORD<1-32> route-map WORD<1-64>
ipv6 isis accept adv-rtr <x.xx.xx> route-map WORD<1-64>
no ipv6 isis accept adv-rtr <x.xx.xx>
no ipv6 isis accept adv-rtr <x.xx.xx> enable
no ipv6 isis accept adv-rtr <x.xx.xx> i-sid <0-16777215>
no ipv6 isis accept adv-rtr <x.xx.xx> i-sid <0-16777215> enable
no ipv6 isis accept adv-rtr <x.xx.xx> i-sid <0-16777215> route-map
no ipv6 isis accept adv-rtr <x.xx.xx> isid-list WORD<1-32>
no ipv6 isis accept adv-rtr <x.xx.xx> isid-list WORD<1-32> enable
no ipv6 isis accept adv-rtr <x.xx.xx> isid-list WORD<1-32> route-map
no ipv6 isis accept adv-rtr <x.xx.xx> route-map

Command Parameters

adv-rtr <x.xx.xx>: Specifies a specific advertising BEB for the IPv6 IS-IS accept policy. The x.xx.xx variable specifies an SPBM nickname.
enable: Enables the IPv6 IS-IS accept policy.
i-sid <0-16777215>: Configures the service instance identifier (I-SID) to which the IPv6 IS-IS accept policy applies. The number 0 represents the GRT.
isid-list WORD <1-32>: Configures a list of I-SIDs to which the IPv6 IS-IS accept policy applies.
route-map WORD<1-64>: Specifies an IPv6 IS-IS route policy.

Default

The default is disabled.

Command Mode

VRF Router Configuration