ip pim rp-candidate group
Configure a candidate rendezvous point (C-RP) to serve as backup to the RP router.
Syntax
-
default ip pim
rp-candidate group <A.B.C.D> <A.B.C.D>
-
ip pim rp-candidate group
<A.B.C.D> <A.B.C.D> rp <A.B.C.D>
-
no ip pim rp-candidate
group <A.B.C.D> <A.B.C.D>
Command Parameters
- {A.B.C.D} {A.B.C.D}
- Specifies the IP address and group
mask of the multicast group. When combined, they identify the prefix that the
local router uses to advertise itself as a C-RP router.
- rp {A.B.C.D}
- Specifies the IP address of the
C-RP router. This address must be one of the local PIM-SM enabled interfaces.
Command Mode
Global Configuration
