tacacs server host

Configures the entry for the primary TACACS+ server.

Syntax

default tacacs server {A.B.C.D}
default tacacs server {A.B.C.D} port
default tacacs server {A.B.C.D} single-connection
default tacacs server {A.B.C.D} single-connection source source-ip-interface enable
default tacacs server {A.B.C.D} source source-ip-interface enable
default tacacs server {A.B.C.D} timeout
default tacacs server host {A.B.C.D} source {A.B.C.D}
no tacacs server {A.B.C.D}
no tacacs server {A.B.C.D} single-connection
no tacacs server {A.B.C.D} source source-ip-interface enable
tacacs server host {A.B.C.D}
tacacs server host {A.B.C.D} key WORD<0-128>
tacacs server host {A.B.C.D} port <1-65535>
tacacs server host {A.B.C.D} port <1-65535> source {A.B.C.D} source-ip-interface enable
tacacs server host {A.B.C.D} single-connection
tacacs server host {A.B.C.D} source {A.B.C.D}
tacacs server host {A.B.C.D} source {A.B.C.D} source-ip-interface enable
tacacs server host {A.B.C.D} timeout <10-30>

{A.B.C.D}: Specifies the IP address of the primary TACACS+ server.
Key WORD<0-128>: Configures the secret key to share with this TACACS+ server. If the key length is zero, that indicates no encryption is used.
port <1-65535>: Configures the TCP port on which the client establishes a connection to the server. A value of 0 indicates that the system specified default value is used. The default is 49.
single-connection: Specifies if the TCP connection between the device and the TACACS+ server is a single connection. If you do not enable the single-connection parameter, the system uses the default connection type that opens and closes a connection for each communication session.
Source {A.B.C.D}: Configures the IP address of the interface to use with this server. If you do not configure an address, the system uses 0.0.0.0 as the default.
Note

Available only on VSP 8600 Series.
source-ip-interface enable: Enables the source address. You must enable this parameter if you configure a valid source IP address. The default is disabled.
Note

Available only on VSP 8600 Series.
timeout <10-30>: Configures the maximum time, in seconds, to wait for this TACACS+ server to reply. The default is 10 seconds.

None

Global Configuration