sflow collector

Syntax

• default sflow collector <1-2>

• default sflow collector <1-2> port

• default sflow collector <1-2> timeout

• no sflow collector <1-2>

• no sflow collector <1-2> address {A.B.C.D}

• no sflow collector <1-2> owner WORD<1-20>

• sflow collector <1-2>

• sflow collector <1-2> address {A.B.C.D}

• sflow collector <1-2> address {A.B.C.D} vrf WORD<1-16>

• sflow collector <1-2> owner WORD<1-20>

• sflow collector <1-2> port <1-65535>

• sflow collector <1-2> timeout <1-65535>

Command Parameters

<1-2>

Specifies the ID to export sFlow datagrams to the collector ID.

address {A.B.C.D}

Specifies the collector IP address.

owner WORD<1–20>

Specifies the sFlow collector name.

port <1–65535>

Specifies the destination UDP port. The default port is 6343.

timeout <1–65535>

Specifies the time remaining (in seconds) before the collector is released. The default is 0, which means you are not using the collector.

vrf

Specifies the name of the VRF used to reach the collector.

Default

None

Command Mode

Global Configuration