redistribute direct (for IS-IS)

Syntax

• default redistribute direct enable

• default redistribute direct metric

• default redistribute direct metric-type

• default redistribute direct route-map

• default redistribute direct subnets

• no redistribute direct

• no redistribute direct enable

• no redistribute direct metric

• no redistribute direct metric-type

• no redistribute direct route-map

• no redistribute direct subnets

• redistribute direct

• redistribute direct enable

• redistribute direct metric <0-65535>

• redistribute direct metric-type external

• redistribute direct metric-type internal

• redistribute direct route-map WORD<0-64>

• redistribute direct subnets allow

• redistribute direct subnets suppress

Command Parameters

enable

Enables route redistribution of the direct protocol. The prefix "default" before the command sets the isis redistribute direct enable to default.

metric <0-65535>

Configures the metric (cost) to apply to redistributed routes. The default is 1.

metric-type external

Configures the type of route to import into the protocol. The default is internal.

metric-type internal

Configures the type of route to import into the direct protocol. The prefix "default" before the command sets the isis redistribute metric-type to default. The default is internal.

route-map WORD<0-64>

Configures the route policy to apply to redistributed routes.

subnets allow

Indicates whether the subnets are advertised individually or aggregated to their classful subnet. Choose allow to advertise the subnets individually with the learned or configured mask of the subnet. The default is allow.

subnets suppress

Indicates whether the subnets are advertised individually or aggregated to their classful subnet. Choose allow to advertise the subnets individually with the learned or configured mask of the subnet. The default is allow.

Default

By default, route redistribution is disabled.

Command Mode

IS-IS Router Configuration