ip msdp keepalive (for a VRF)

Configure keepalive messages to adjust the interval in seconds at which an MSDP peer sends keep alive messages.

Syntax

Command Parameters

{A.B.C.D}
Specifies the MSDP peer IP address.
<0-21845>
Specifies the keep alive interval in seconds. The default is 60 seconds.
<0-65535>
Specifies the hold time interval in seconds. The default is 75 seconds. 0 seconds means the peer never expires. Values 1 and 2 are not allowed.

Default

The default is 60 seconds.

Command Mode

VRF Router Configuration