Verify that the image and configuration are loaded properly.
show sys software
None
User EXEC
rlogin is only supported on VSP 8600 Series.
The show sys software command displays the following information:
|
Output field |
Description |
|---|---|
|
Default Runtime Config File |
Displays the default Run-time configuration file directory name. |
|
Config File |
Displays the name of a new configuration file. |
|
Last Runtime Config Save |
Displays the last run-time configuration saved. |
|
Version |
Displays the software version information. |
|
PrimaryConfigSource |
Displays the primary boot configuration file. |
|
SecondaryConfigSource |
Displays the secondary boot configuration file. |
|
EnableFactoryDefaults |
Displays if the switch will bypass the loading of the switch configuration file and load the factory defaults. |
|
EnableDebugMode |
Displays if the switch debugs the configuration file during loading configuration at system boot. |
|
EnableRebootOnError |
Displays if the switch automatically reboots on a fatal error. |
|
EnableTelnetServer |
Displays if the Telnet server is enabled. |
|
EnableRloginServer |
Displays if the Rlogin server is enabled. |
|
EnableFtpServer |
Displays if the FTP server is enabled. |
|
EnableTftpServer |
Displays if the TFTP server is enabled. |
The following example displays output from the show sys software command.
Switch:1#show sys software System Software Info : Default Runtime Config File : /intflash/config.cfg Config File : Last Runtime Config Save : 0 Boot Config Table Version : Build 4.1.0.0 (GA) on Fri May 30 18:04:13 EDT 2014 PrimaryConfigSource : /intflash/config.cfg SecondaryConfigSource : /intflash/config.cfg EnableFactoryDefaults : false EnableDebugMode : false EnableRebootOnError : true EnableTelnetServer : true EnableRloginServer : false EnableFtpServer : true EnableTftpServer : false