show application iqagent

Show ExtremeCloud IQ Agent configuration information and status.

Syntax

show application iqagent

Default

None

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.

Command Output

The show application iqagent command displays the following information:


Output field	Description
Agent Admin State	Specifies the administrative state of the IQ Agent.
Agent Version	Specifies the IQ Agent version that runs on the device.
Agent Oper State	Specifies the operational status of the IQ Agent, whether IQ Agent is connected to ExtremeCloud IQ.
Server Address	Specifies the default ExtremeCloud IQ server.
Server Address Origin	Specifies the origin of the server IP address. None - displays the default value (hac.extremecloudiq.com) or 0.0.0.0 Configured - displays the static server IP address configured using CLI or EDM. DHCP - displays the dynamic server IP address configured by the DHCP server.
Proxy Address	Specifies the proxy address.
Proxy TCP Port	Specifies the proxy TCP port.
Proxy Username	Specifies the proxy server username.
Proxy Password	Specifies the proxy server password.

Example

The following example displays the ExtremeCloud IQ Agent configuration.

Switch:1>show application iqagent

================================================================================
                                 IQAgent Info
================================================================================
Agent Admin State       : true
Agent Version           : 0.2.7
Agent Oper State        : connected
Server Address          : hac.extremecloudiq.com
Server Address Origin   : None
Proxy Address           : extremeiq.com
Proxy TCP Port          : 21
Proxy Username          : admin