show ip source binding

Displays the IPv4 addresses that are allowed on all IP Source Guard enabled ports or for a specified port.

Syntax

show ip source binding
show ip source binding {A.B.C.D}
show ip source binding interface gibabitEthernet
show ip source binding interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}
show ip source binding vlan <1-4059>
show ip source binding vrf WORD<1-16>
show ip source binding vrfids WORD<0-512>

{A.B.C.D}: Displays the IP Source Guard address bindings for the specified IPv4 address.
interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}: Displays the IPv4 addresses that are allowed on the specified IP Source Guard port.
vlan <1-4059>: Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.
vrf WORD<1-16>: Displays the IP Source Guard address bindings list for a specific vrf.
vrfids WORD<0-512>: Displays the IP Source Guard address bindings list for a specific vrf id.

None

User EXEC