show ipv6 ipvpn

Display the configuration for IPv6 VPN enabled VRFs.

Syntax

show ipv6 ipvpn
show ipv6 ipvpn vrf WORD<1-16>
show ipv6 ipvpn vrf WORD<1-16> vrfids WORD<0-512>
show ipv6 ipvpn vrfids WORD<0-512>

Command Parameters

vrf WORD<1-16>: Specifies a VRF.
vrfids WORD<0-512>: Specifies the VRF ID.

Default

None

Command Mode

User EXEC

Example

The following example displays the command output.

Switch:1#show ipv6 ipvpn 
==========================================================================================
                                        IPv6 IPVPN
==========================================================================================
VRF Name            VRF ID   IPv6 IPVPN   IPv4 IPVPN   I-SID        I-SID Name
------------------------------------------------------------------------------------------
vrfred              2        enabled      disabled     5555         ISID-5555
------------------------------------------------------------------------------------------
1 out of 1 Total IPv6 L3 VSN, 1 active IPv6 and 0 active IPv4 displayed.