ip ospf authentication-key (for a port)

Configure the eight-character simple password authentication key for the port.

Syntax

Command Parameters

port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

WORD<0-8>
Specifies the authentication key.

Default

None

Command Mode

GigabitEthernet Interface Configuration