mlt

Syntax

• mlt <1-512>

• mlt <1-512> enable

• mlt <1-512> encapsulation dot1q

• mlt <1-512> name WORD<0-20>

• mlt <1-512> vlan <1-4059>

• mlt <1-512>

• mlt <1-512> private-vlan {isolated|promiscuous|trunk}

• no mlt <1-512>

• no mlt <1-512> encapsulation dot1q

• no mlt <1-512> name

• no mlt <1-512> private-vlan

• no mlt <1-512> vlan <1-4059>

Command Parameters

<1-512>

Specifies the MLT ID in the range of 1-512.

enable

Creates and enables a new MLT.

encapsulation dot1q

Sets encapsulation. dot1q enables trunking on the MLT.

name <0-20>

Changes the name for this MLT in the range of 0-20 characters.

private-vlan {isolated|promiscuous|trunk}

Specifies the private VLAN port type for this MLT.

vlan <1-4059>

Specifies the VLAN ID in the range of 1 to 4059. By default, VLAN IDs 1 to 4059 are configurable and the system reserves VLAN IDs 4060 to 4094 for internal use. On switches that support the vrf-scaling and spbm-config-mode boot configuration flags, if you enable these flags, the system also reserves VLAN IDs 3500 to 3998. VLAN ID 1 is the default VLAN and you cannot create or delete VLAN ID 1.

Default

None

Command Mode

Global Configuration

Usage Guidelines

You cannot configure an MLT name that uses all numbers, for example, 222.