show isis multi-area ip redistribute vrf

Displays the IS-IS Multi-area SPB IPv4 redistribution configuration for a specific Virtual Router Forwarding (VRF) instance.

Syntax

show isis multi-area ip redistribute vrf WORD<1-16>

Command Parameters

WORD<1-16>: Specifies the VRF name.

Default

The default is none.

Command Mode

User EXEC

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.

Command Output

The show isis multi-area ip redistribute vrf WORD<1-16> command displays the following information:


Parameter	Description
DIRECTION	Indicates the direction of the redistribution policy.
ENABLE	Indicates if the redistribution policy is enabled on the switch.
RPOLICY	Indicates the route policy for IS-IS Multi-area SPB IPv4 unicast and routed multicast redistribution for a specific VRF.

Example

Displaying the IS-IS Multi-area SPB IPv4 redistribution configuration for the VRF instance:

Switch:1>show isis multi-area ip redistribute vrf VRF1
================================================================================
            ISIS Multiarea Redistribute List for ip unicast - VRF VRF1
================================================================================
DIRECTION            ENABLE     RPOLICY
--------------------------------------------------------------------------------
home-to-remote       FALSE

================================================================================
         ISIS Multiarea Redistribute List for routed multicast - VRF VRF1
================================================================================
DIRECTION            ENABLE     RPOLICY
--------------------------------------------------------------------------------
home-to-remote       TRUE       Test