ip address (on a VLAN)

Syntax

• ip address {A.B.C.D/X}

• ip address {A.B.C.D} {A.B.C.D}

• ip address {A.B.C.D} {A.B.C.D} dvr-one-ip

• ip address {A.B.C.D} {A.B.C.D} <MAC-offset>

• ip address {A.B.C.D} {A.B.C.D} name WORD<0-64>

• no ip address {A.B.C.D}

Command Parameters

<A.B.C.D/X>|<A.B.C.D> <A.B.C.D>

Specifies the IP address and subnet mask in the format A.B.C.D/X or A.B.C.D A.B.C.D.

dvr-one-ip

Specifies that the IP address will be used as the DvR gateway IP address and will be used by all other DvR Controllers for the DvR VLAN subnet.

<MAC-offset>

Specifies a number by which to offset the MAC address from the chassis MAC address. This ensures that each IP address has a different MAC address. If you omit this variable, a unique MAC offset is automatically generated. Different hardware platforms support different ranges. To see which range is available on the switch, use the CLI command completion Help.

This parameter does not apply to all hardware platforms.

name WORD <0-64>

Specifies the name associated with the IP address on a VLAN.

Default

None

Command Mode

VLAN Interface Configuration

Usage Guidelines

The name parameter is not supported on VSP 8600 Series or XA1400 Series.