slamon agent
Configures the SLA Mon agent.
Syntax
-
default slamon agent ip
address
-
default slamon agent
port
-
slamon agent ip address
{A.B.C.D}
-
slamon agent ip address
{A.B.C.D} vrf WORD<1-16>
-
slamon agent port
<0-65535>
Command Parameters
- ip address {A.B.C.D}
- Configures the SLA Mon agent IP address. You must configure the IP address before the agent can
process received discovery packets from the SLA Mon server. The agent IP address is a mandatory parameter if you enable SLA Mon. The default value is 0.0.0.0.
- port <0-65535>
- Configures the UDP port for SLA Mon agent-server communication. The agent receives discovery packets on this port.
The default is port 50011. The server must use the same port.
- vrf WORD<1-16>
- Specifies a VRF name. The VRF
parameter is optional.
Command Mode
Application Configuration
Usage Guidelines
This command does not apply to all hardware platforms. For more information about
feature support, see VOSS Feature Support Matrix.
