ip ospf accept adv-rtr

Syntax

• default ip ospf accept adv-rtr {A.B.C.D}

• default ip ospf accept adv-rtr {A.B.C.D} enable

• default ip ospf accept adv-rtr {A.B.C.D} metric-type

• default ip ospf accept adv-rtr {A.B.C.D} route-map

• ip ospf accept adv-rtr {A.B.C.D}

• ip ospf accept adv-rtr {A.B.C.D} enable

• ip ospf accept adv-rtr {A.B.C.D} metric-type { type1 | type2 | any }

• ip ospf accept adv-rtr {A.B.C.D} route-map WORD<0-64>

• no ip ospf accept adv-rtr {A.B.C.D}

• no ip ospf accept adv-rtr {A.B.C.D} enable

Command Parameters

{A.B.C.D}

Specifies the IP address.

adv-rtr <A.B.C.D>

Specifies the advertising router IP address.

enable

Enables an OSPF accept entry for a specified advertising router.

metric-type <type1|type2|any>

OSPF external routes match this entry. any means match all external routes. type1 means match external type 1 only. type2 means match external type 2 only.

route-map WORD<0-64>

Specifies the name of the route policy to use for filtering external routes advertised by the specified advertising router before accepting into the routing table.

vrf WORD<1-16>

Specifies the configuration for a particular VRF. WORD<1-16> specifies the VRF name.

Default

None

Command Mode

VRF Router Configuration