subnet-vlan

Enable subnet-based VLAN on the port.

Note

Note

This command does not appear on all hardware platforms.

Syntax

Command Parameters

enable
Enables or disables subnet-based VLAN for the port.
port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

The default is enabled.

Command Mode

GigabitEthernet Interface Configuration