trace flags isis
Enable or disable the Intermediate-System-to-Intermediate-System trace flags. After IS-IS
trace is turned on, only displays trace information about the set flag.
Syntax
-
trace flags isis
-
trace flags isis remove
{none | tx-hello | rx-hello | tx-pkt | rx-pkt | adj | opt | tx-lsack | rx-lsack
| tx-lsp | rx-lsp | pkt-err | nbr-mismatch | flood | spf-intra | spf-inter |
spf-extern | prefix | nbr-change | intf-change | decide | fdb | dr | auth-fail
| config | purge | policy | redist | tx-snp | rx-snp | timer | spbm-decide |
global | perf | ucast-fib | node | mcast-fib | isid | ip-shortcut | debug}
-
trace flags isis set {none
| tx-hello | rx-hello | tx-pkt | rx-pkt | adj | opt | tx-lsack | rx-lsack |
tx-lsp | rx-lsp | pkt-err | nbr-mismatch | flood | spf-intra | spf-inter |
spf-extern | prefix | nbr-change | intf-change | decide | fdb | dr | auth-fail
| config | purge | policy | redist | tx-snp | rx-snp | timer | spbm-decide |
global | perf | ucast-fib | node | mcast-fib | isid | ip-shortcut | debug}
Command Parameters
- adj
- Specifies the option of
adjacenies.
- auth-fail
- Specifies the option of
authorization failed.
- config
- Specifies the option of
configuration.
- dd-masterslave
- The current release does not use
this option.
- debug
- Specifies the option of
debug.
- decide
- Specifies the option of shortest
path first computation.
- dr
- Specifies the option of designated
router.
- fdb
- Specifies the option of filtering
database.
- flood
- Specifies the option of
flood.
- global
- The current release does not use
this option.
- ha
- Specifies the option of High
Availability.
- intf-change
- Specifies the option of IS-IS
circuit (interface) events.
- ip-multicast
- Specifies the option of IP
multicast.
- ip-shortcut
- Specifies the option of IP
Shortcut.
- isid
- Specifies the option of
I-SID.
- mcast-fib
- Specifies the option of multicast
forwarding information base.
- nbr-change
- Specifies the option of neighbor
change.
- nbr-mismatch
- Specifies the option of neighbor
mismatch.
- node
- Specifies the option of node.
- none
- Specifies the option of none.
- opt
- Specifies the option of IS-IS
TLVs.
- perf
- Specifies the option of SPBM
performance.
- pkt-err
- Specifies the option of packet
error.
- policy
- The current release does not use
this option.
- prefix
- Specifies the option of
prefix.
- purge
- Specifies the option of Link State
Packet purge.
- redist
- Specifies the option of
redistribute.
- remove
- Removes the
Intermediate-System-to-Intermediate-System (IS-IS) trace flags for the specified
option.
- rx-hello
- Specifies the option of received
IS-IS hello packets.
- rx-lsack
- Specifies the option of received
LSP acknowledgement.
- rx-lsp
- Specifies the option of received
Link State Packet.
- rx-pkt
- Specifies the option of received
packets.
- rx-snp
- Specifies the option of received
sequence number packet (CSNP and PSNP).
- set
- Configures the
Intermediate-System-to-Intermediate-System (IS-IS) trace flags for the specified
option.
- spbm-decide
- Specifies the option of shortest
path first computation for SPBM.
- spf-extern
- Specifies the option of shortest
path first external.
- spf-inter
- Specifies the option of shortest
path first internal.
- spf-intra
- The current release does not use
this option.
- timer
- Specifies the option of
timer.
- tx-hello
- Specifies the option of
transmitted IS-IS hello packets.
- tx-lsack
- Specifies the option of
transmitted LSP acknowledgement.
- tx-lsp
- Specifies the option of
transmitted Link State Packet.
- tx-pkt
- Specifies the option of
transmitted packets.
- tx-snp
- Specifies the option of
transmitted sequence number PDU (CSNP and PSNP).
- ucast-fib
- Specifies the option of unicast
forwarding information base.
