neighbor WORD<0-1536> update-source

Specifies the source IP address when Border Gateway Protocol (BGP) packets are sent to this peer or peer group. You cannot configure this parameter when the admin-state is enable.

Syntax

default neighbor WORD<0-1536> update-source
neighbor WORD<0-1536> update-source WORD<1-256>
no neighbor WORD<0-1536> update-source

Command Parameters

<A.B.C.D>: <A.B.C.D> is the specified source IP address.

Default

None

Command Mode

BGP Router Configuration

9037144-00 Rev AA