show i-sid name

Shows the global I-SID name to I-SID mapping.

Syntax

show i-sid name [name WORD<1-64>]

Command Parameters

name WORD<1-64>

Specifies the global I-SID name to I-SID mapping.

By default, the service is named ISID-x, where x correlates to the I-SID number of the service.

Default

None

Command Mode

User EXEC

Usage Guidelines

This command is not supported on VSP 8600 Series or XA1400 Series.

Command Output

The show i-sid name command displays the following information:


Output field	Description
I-SID	Indicates the I-SID IDs.
ISID NAME	Indicates the I-SID names.
TYPE	Shows the I-SIDs that are in use as services and the I-SIDs that the administrator names. An I-SID can have one base type or a combination of base types. You can use the combination of base types so that multiple services can use the same I-SID at the same time. Following are some of the combinations of the base types: config—Shows the SUNI (elan) or TUNI (elan-transparent) in use. discoverLocal—Shows the information that is discovered locally. For example, fabric attach and endpoint tracking information that is received from the local box. discoverRemote—Shows the information that is discovered remotely. For example, SMLT peer communicates on fabric attached or EPT discovery. mgmt—Shows the fabric attach management details. l2vsn—Shows the layer 2 VSN details, such as VLAN I-SID for port based or private VLAN for etree. l3vsn—Shows the layer 3 VSN details, such as IPVPN and IPv6 IPVPN. adminName—Shows the user names service details. eapDiscoverLocal—Shows the information that is discovered by EAP. eapDiscoverRemote—Shows the information that is discovered by an EAP IST peer. autoSense—Shows the onboarding I-SID, discovered by Zero Touch Fabric Configuration.

Example

View I-SID names.

Switch:1(config)#show i-sid name
=========================================================================
                          I-SID Name
=========================================================================
I-SID           I-SID NAME                      TYPE
-------------------------------------------------------------------------
1               ExtremeServer1                  adminName
2               ExtremeServer2                  adminName
3               ExtremeServer3                  config adminName
4               ISID-4                          config
23              ISID-23                         config
25              ExtremeServer4                  config adminName

Total number of I-SID Name entries: 6.