ip ospf area (for a VRF)

Syntax

• default ip ospf area {A.B.C.D}

• default ip ospf area {A.B.C.D} default-cost

• default ip ospf area {A.B.C.D} import

• default ip ospf area {A.B.C.D} import-summaries enable

• default ip ospf area {A.B.C.D} stub

• ip ospf area {A.B.C.D}

• ip ospf area {A.B.C.D} default-cost <0-16777215>

• ip ospf area {A.B.C.D} import external

• ip ospf area {A.B.C.D} import noexternal

• ip ospf area {A.B.C.D} import nssa

• ip ospf area {A.B.C.D} import-summaries enable

• ip ospf area {A.B.C.D} stub

• no ip ospf area {A.B.C.D}

• no ip ospf area {A.B.C.D} import-summaries enable

Command Parameters

<A.B.C.D>

Configures the OSPF identification number for the area, typically formatted as an IP address.

default-cost <0-16777215>

Stub area default metric for this stub area, which is the cost from 0 to 16 777 215. This is the metric value applied at the indicated type of service.

import <external|noexternal|nssa>

Specifies the type of area: external - Stub and NSSA (not so stubby area) are both false. noexternal-Configures the area as stub area. nssa - Configures the area as NSSA.

import-summaries enable

Configures the area support to import summary advertisements into a stub area. This parameter must be used only if the area is a stub area.

stub

Configures the import external option for this area as stub. A stub area has only one exit point (router interface) from the area.

Default

None

Command Mode

VRF Router Configuration