lldp med-network-policies
Configures LLDP-MED network policies on specific ports.
Syntax
-
default lldp
med-network-policies {guest-voice | guest-voice-signaling | softphone-voice |
streaming-video | video-conferencing | video-signaling | voice |
voice-signaling}
-
lldp med-network-policies
{guest-voice | guest-voice-signaling | softphone-voice | streaming-video |
video-conferencing | video-signaling | voice | voice-signaling} [dscp
<0-63>] [priority <0-7>] [tagging {tagged|untagged}] [vlan-id <0-4059>]
-
no lldp
med-network-policies {guest-voice | guest-voice-signaling | softphone-voice |
streaming-video | video-conferencing | video-signaling | voice |
voice-signaling}
Command Parameters
- {guest-voice | guest-voice-signaling | softphone-voice | streaming-video |
videoconferencing | video-signaling | voice | voice-signaling}
- Specifies the type of LLDP-MED network policy.
- dscp <0-63>
- Specifies the Layer 3 DiffServ
Code Point (DSCP) value, as defined in IETF RFC 2474 and RFC 2475.
- priority <0-7>
- Specifies the priority level, as
defined in IEEE 802.1D.
- tagging {tagged | untagged}
- Specifies the type of VLAN tagging
to apply on the selected ports.
- vlan-id <0-4059>
- Specifies the VLAN ID for the
port, as defined in IEEE 802.1Q. If you configure priority tagged frames, the
system recognizes only the 802.1D priority level and uses a value of 0 for the
VLAN ID of the ingress port.
Command Mode
GigabitEthernet Interface Configuration
