auto-sense isis hello-auth type simple

Configures simple password authentication for IS-IS hello packets on ports that are operating in Auto-sense mode. Simple password authentication uses a text password in the transmitted packet. The receiving router uses an authentication key (password) to verify the packet.

Syntax

auto-sense isis hello-auth type simple
auto-sense isis hello-auth type simple [key WORD<1-16>]
auto-sense isis hello-auth type simple key WORD<1-16> [key-id <1-255>]
no auto-sense isis hello-auth

Command Parameters

key WORD<1-16>: Specifies the authentication key (password) that the receiving router uses to verify the packet.
key-id <1-255>: Specifies the key ID.

Default

None.

Command Mode

Global Configuration

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.