link-state group

Syntax

• default link-state group <1-48> enable

• link-state group <1-48> downstream interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• link-state group <1-48> downstream mlt <1-512>

• link-state group <1-48> enable

• link-state group <1-48> upstream interface gigabitEthernet {slot/port[/sub-port][-slot/port[/sub-port]][,...]}

• link-state group <1-48> upstream mlt <1-512>

• no link-state group <1-48> enable

Command Parameters

<1-48>

Specifies the link-state group ID.

downstream

Specifies a downstream interface for the LST group.

enable

Enables the command.

interface gigabitEthernet {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}

Specifies the slot and port for the upstream or downstream LST group.

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

mlt <1-512>

Specifies an MLT ID for the upstream or downstream LST group.

upstream

Specifies an upstream interface for the LST group.

Default

None

Command Mode

Global Configuration

Usage Guidelines

DEMO FEATURE - Link-state tracking (LST) is a demonstration feature on some products. Demonstration features are provided for testing purposes. Demonstration features are for lab use only and are not for use in a production environment. For more information on feature support, see VOSS Feature Support Matrix.