run spbm

Syntax

• run spbm

• run spbm clean

Command Parameters

clean

Removes existing SPBM configurations, disables CFM, and returns the CFM MEP-ID and level configurations to default values.

Default

None

Command Mode

Global Configuration

Usage Guidelines

This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.

If the switch uses Zero Touch Fabric Configuration, you must run the following commands before you use the run spbm clean command:

• no Auto-sense onboarding i-sid

• no vlan i-sid <1-4059>