eapol status

Enable Extensible Authentication Protocol (EAPoL) on an interface.

Syntax

default eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} status
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} status authorized
eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} status auto
eapol status {authorized|auto}
no eapol port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} status

authorized: Specifies the port is always authorized.
auto: Specifies that port authorization depends on the results of the EAPoL authentication by the RADIUS server.
port {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}: Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

None

GigabitEthernet Interface Configuration