clear ip dhcp-relay counters

Clear the Ip Dhcp Relay counter.

Syntax

Command Parameters

<0-511>
Specifies the VRF ID.
gigabitethernet {slot/port[/sub-port] [-slot/port[/sub-port]] [,...]}
Clear IP routes on the Interface Gigabit Ethernet.

Identifies the slot and port in one of the following formats: a single slot and port (slot/port), a range of slots and ports (slot/port-slot/port), or a series of slots and ports (slot/port,slot/port,slot/port). If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

WORD<1-16>
Specifies the VRF name.

Default

None

Command Mode

Privileged EXEC