ip rip redistribute { direct | isis | ospf | rip | static }

Configure and enable redistribution entries to allow a protocol to announce routes of a certain source type, for example, static, RIP, or direct.

Syntax

default ip rip redistribute { direct | isis | ospf | rip | static }
default ip rip redistribute { direct | isis | ospf | rip | static } enable
default ip rip redistribute { direct | isis | ospf | rip | static } enable vrf-src WORD<1-16>
default ip rip redistribute { direct | isis | ospf | rip | static } metric
default ip rip redistribute { direct | isis | ospf | rip | static } metric vrf-src WORD<1-16>
default ip rip redistribute { direct | isis | ospf | rip | static } route-map
default ip rip redistribute { direct | isis | ospf | rip | static } route-map vrf-src WORD<1-16>
default ip rip redistribute { direct | isis | ospf | rip | static } vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static }
ip rip redistribute { direct | isis | ospf | rip | static } enable
ip rip redistribute { direct | isis | ospf | rip | static } enable vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static } metric <0-65535>
ip rip redistribute { direct | isis | ospf | rip | static } metric <0-65535> vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static } route-map WORD<0-64>
ip rip redistribute { direct | isis | ospf | rip | static } route-map WORD<0-64> vrf-src WORD<1-16>
ip rip redistribute { direct | isis | ospf | rip | static } vrf-src WORD<1-16>
no ip rip redistribute { direct | isis | ospf | rip | static }
no ip rip redistribute { direct | isis | ospf | rip | static } enable
no ip rip redistribute { direct | isis | ospf | rip | static } enable vrf-src WORD<1-16>
no ip rip redistribute { direct | isis | ospf | rip | static } route-map
no ip rip redistribute { direct | isis | ospf | rip | static } route-map vrf-src WORD<1-16>
no ip rip redistribute { direct | isis | ospf | rip | static } vrf-src WORD<1-16>

Command Parameters

enable: Enables the route redistribution instance.
metric <0-65535>: Configures the metric to apply to redistributed routes.
route-map WORD<0-64>: Configures the route map to apply to redistributed routes.
vrf WORD <1-16>: Specifies the VRF instance.
vrf-src WORD<1-16>: Specifies the source VRF instance. This parameter is not required for redistribution within the same VRF.
WORD<0-32>: Specifies the type of routes to redistribute-the protocol source.

Default

None

Command Mode

VRF Router Configuration