display information about the RPs selected for a multicast group
show ipv6 pim rp-hash
None
User EXEC
The show ipv6 pim rp-hash command displays the following information:
|
Output field |
Description |
|---|---|
|
GRPADDRESS |
Shows the IPv6 address of the multicast group. When combined with the group mask, it identifies the prefix that the local router uses to advertise itself as a C-RP router. |
|
GRPMASK |
Shows the address mask of the multicast group. When combined with the group address, it identifies the prefix that the local router uses to advertise itself as a C-RP router. |
|
RP-ADDR |
Shows the IPv6 address of the static RP. |
|
HOLDTIME |
Shows the hold time of the static RP. The value is 0. |
|
EXPTIME |
Shows the minimum time remaining before the static RP is down. The value is 0. |
The following example displays information about the RPs selected for a multicast group.
Switch:1>show ipv6 pim rp-hash
=====================================================================================
Pim RPSet - GlobalRouter
=====================================================================================
GRPADDR/GRPMASK HOLDTIME EXPTIME
RP-ADDR
-------------------------------------------------------------------------------------
ff10:0:0:0:0:0:0:0/64 0 0
5040:0:0:0:0:1:84:1
ff30:0:0:0:0:0:0:0/64 0 0
5040:0:0:0:0:1:84:1
ff30:1:0:0:0:0:0:0/32 0 0
5174:0:0:0:0:1:84:1
Total RP Set Entries Displayed: 3/3
-------------------------------------------------------------------------------------