Displays the IS-IS SPBM area virtual node information.
show isis area-vnode
The default is none.
User EXEC
This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.
The show isis area-vnode command displays the following information:
|
Parameter |
Description |
|---|---|
|
REPRESENTED-AREA |
Indicates the type of area that the area virtual node represents. |
|
SYSTEM-ID |
Indicates the adjacent system ID of the router. |
|
NICK-NAME |
Indicates the nickname of the area virtual node. |
|
HOST-NAME |
Indicates the hostname listed in the LSP. If the host name is not configured, then the system name is displayed. |
|
AREA |
Indicates the type of area as home or remote. |
Displaying the IS-IS SPBM area virtual node information on the switch:
Switch:1>show isis area-vnode
=================================================================================================
ISIS SPBM Multi-Area VNode Info
=================================================================================================
VNODE VNODE VNODE REPRESENTED REPRESENTED VNODE
SYSTEM-ID NICK-NAME HOST-NAME AREA-ADDRESS AREA USED-IN-AREA
-------------------------------------------------------------------------------------------------
9200.30ff.fff0 9.00.30 area-9.00.30 49.0030 HOME REMOTE
9200.50ff.fff0 9.00.50 area-9.00.50 49.0050 REMOTE HOME