filter acl ace policer

Use the policer filter to limit the service and peak rate traffic at the ingress.

Syntax

default filter acl ace policer <acl-id> <ace-id>
filter acl ace policer <acl-id> <ace-id> svc-rate <0-4000000000> peak-rate <8-4000000000>
no filter acl ace policer <acl-id> <ace-id>

<ace-id>: Specifies the ACE ID. Different hardware platforms support different ACE ID ranges. Use the CLI Help to see the available range for the switch.
<acl-id>: Specifies the ACL ID. Use the CLI Help to see the available range for the switch.
policer: Specifies the policer parameters for an ACE.
svc-rate <0-4000000000>: Specifies the rate of transfer of traffic which has to be delivered.
peak-rate <8-4000000000>: Specifies the maximum rate of transfer of traffic above which the packets are dropped at ingress.

None

Global Configuration

This command does not apply to all hardware platforms. For more information about feature support, see VOSS Feature Support Matrix.