ip ipsec policy (for a management interface)

Syntax

• default ip ipsec policy WORD<1-32>

• ip ipsec policy WORD<1-32>

• ip ipsec policy WORD<1-32> dir both

• ip ipsec policy WORD<1-32> dir in

• ip ipsec policy WORD<1-32> dir out

• no ip ipsec policy WORD<1-32> dir both

• no ip ipsec policy WORD<1-32> dir in

• no ip ipsec policy WORD<1-32> dir out

Command Parameters

dir <both|in|out>

Specifies the direction to which IPsec applies. Both specifies both ingress and egress traffic, in specifies ingress traffic, and out specifies egress traffic. By default, the direction is both.

WORD<1-32>

Specifies the IPsec policy name.

Default

None

Command Mode

mgmtEthernet Interface Configuration

Usage Guidelines

This command is only supported on VSP 8600 Series. This command is deprecated for all hardware platforms that support VOSS Release 8.2 and later.